Selective Call Reject

If you dont want to receive calls from certain numbers, use Selective Call Reject. You can reject up to 30 different numbers, each of whom will receive a recorded message.

There is no additional hardware needed and any telephone can have it active.

Instructions

1. Listen for the dial tone.
2. Press *60. You will hear a prompt telling you the status of the service and how many phone numbers you have on your list
3. Press 3
4. You will hear confirmation that the service is either on or off.

Adding and Removing Numbers

In all cases, pick up the receiver and listen for the dial tone, then press the access code for the relevant Selective Call Feature. You will then hear a prompt telling you the status of the service and how many phone numbers you have on your list

1. At the prompt, press #.
2. Enter the phone number (including area code) and press # again.
3. You will then hear the number you have just entered.
4. To enter another number, press # again.

1. At the prompt, press *.
2. Enter the phone number to be removed (including the area code), then press *.
3. You will then hear the number you have just entered.
4. If the number is correct, press 1. If it is incorrect, press 0 to return to the main menu
5. You will then hear the number that has been removed.
6. To enter another number, press * again.

1. At the prompt, press 1
2. You will then hear the numbers on your list.
3. When you reach the end of the list, you can hang up

Cost and Availability

EscapeNet selective call reject is free to use on any plan, and no additional harwdware is required.

Setting It Up

To activate selective call reject simply order online or contact one of our friendly staff on 1300 135 235